10-100-1000M Duplex FIBER WDM Media Converters 10KM 20KM 40KM 80KM 120KM

10-100-1000M Duplex FIBER WDM Media Converters 10KM 20KM 40KM 80KM 120KM

Aifon Technology has been focused on 10-100-1000m duplex fiber wdm media converters 10km 20km 40km 80km 120km since 2009, which is well-known as one of the leading professional manufacturers. Equipped with a productive factory, we warmly welcome you to buy or wholesale our quality, stable and...

Product Details

Aifon Technology has been focused on 10-100-1000m duplex fiber wdm media converters 10km 20km 40km 80km 120km since 2009, which is well-known as one of the leading professional manufacturers. Equipped with a productive factory, we warmly welcome you to buy or wholesale our quality, stable and low cost products. And customized service is also available.

10/100/1000M Duplex FIBER WDM Media converters 10KM 20KM 40KM 80KM 120KM

This product supports IEEE802.3 10 Base-T standard/IEEE 802.3u 100Base-TX/FX standard/IEEE 802.3z 1000Base-TX/FX standard,as well as full duplex and half duplex mode.

Installation
1. Interface
RJ-45 interface
The transmission media adopts CAT5 twisted-pair with typical length of 100 meter. It features the function of automatically identifying the through line and cross wire 
Fiber interface 
SC/ST fiber interface is of duplex mode type, including two interfaces, namely TX and RX. When the two sets of optical transceiver are interfaced or connected to switch with fiber interface, the fiber is in cross connection, namely "TX-RX", "RX-TX" (direct butting for single optical fiber).
2. Connection
The network device (work station, hub or switch) with RJ-45 interface is connected to RJ-45 jack of optical transceiver through twisted-pair. And the multi/single mode fiber is connected to SC/ST fiber interface of the optical transceiver. Then switch on. The corresponding LED is on for correct connection. (See the table below for the LED indicator lamp)

Technical parameters:
1. Standard Protocol: 
IEEE802.3 10 Base-T standard
IEEE 802.3u 100Base-TX/FX standard
IEEE 802.3z 1000Base-TX/FX standard
2.Connector:oneUTPRJ-45connector,oneSC/STconnector
3. Operation mode: full duplex mode or half duplex mode
4. Power supply parameter: 
outside: 5V DC 2A
built-in: 110-265V AC  48VDC
5. Environmental temperature: 0��?60 ��?lt;br /> 6. Relative humidity: 5%-90%
8. TP cable: Cat5 UTP cable
9. Transfer fiber: 
multi-mode: 50/125, 62.5/125 or 100/140μm
single mode:: 8.3/125, 8.7/125, 9/125 or 10/125μm

Order Information

Type NO.

Description

Power supply

Connector port

10/100/1000M  Duplex

AT-GM01

10/100/1000M MM(220M/500M)

External

SC/ST/FC

AT-GS01-20

10/100/1000M SM(20KM)

External

SC/ST/FC

AT-GS01-40

10/100/1000M SM(40KM)

External

SC/ST/FC

AT-GS01-60

10/100/1000M SM(60KM)

External

SC/ST/FC

AT-GS01-80

10/100/1000M SM(80KM)

External

SC/ST/FC

10/100/1000M BIDI Simplex

AT-GS01-BIDI-10

10/100/1000M WDM BIDI(10KM)Simplex

External

SC/ST/FC

AT-GS01-BIDI-20

10/100/1000M WDM BIDI(20KM)Simplex

External

SC/ST/FC

AT-GS01-BIDI-40

10/100/1000M WDM BIDI(40KM)Simplex

External

SC/ST/FC

AT-GS01-BIDI-60

10/100/1000M WDM BIDI(60KM)Simplex

External

SC/ST/FC

AT-GS01-BIDI-80

10/100/1000M WDM BIDI(80KM)Simplex

External

SC/ST/FC

SFP Converter

AT-GM01-SFP

10/100/1000M MM(Include SFP tranceiver)

External

LC

AT-GS01-SFP-10

10/100/1000M SM(Include SFP Tranceiver-10KM)

External

LC

Previous:10-100-1000M SFP SLOTS Gigabit FIBER MEDIA CONVERTER Next:FTTX Consulting and Design

Inquiry